Alien Boats
299 Hump Yard Rd E1E 4S3 Moncton, NB, Canada

Some pictures of 30' x 8' aluminum barges

22’ x 9’3" offshore, 1/4 thick deep V hull design, 18 degree deadrise, reverse chine. Any comments or suggestions would be greatly appreciated!

18 ft flat bottom boat with 30 inch sides 6 ft wide 3/16 bottom and sides with 1 1/4 pipe as gunnels running full length of sides 1/4 transom to run at 12 degrees from vertical 4x2 channel run across top inside of transom as a stiffer as well as for mounting outboard 4x2 channel on sides approximately 12 in up and approx 12ft long as rubrails 3 2x2x1/4 angles evenly spaced stitched to bottom running from stern to approximately halfway up bow 1 welded aluminum c...oupler through transom for draining 2 pc 1/4 x 8 wide doubler plates on transom running vertical for full height of transom 1 fully welded crash tank on bow 1 fully welded seat with lid for dry storage approx halfway between bow and stern to be full width of boat and contain scupper (4x2 channel) in middle to evacuate water from bow to stern 4 pc 1/2 lifting lugs positioned on the top 4 corners for use with shackles Transom height: 22 vertical from inside of mounting bracket to the anti-cavitation plate Dry Weight: 1,000 lbs, Max 65HP, Capacity 1,000 lbs. See more

Alien boat builder launches in Moncton---Times & Transcript news