Steves Music Store Toronto

It doesn’t get much nicer than this. Gibson Custom Les Paul Custom Shop Ebony! Wow. IN STOCK IN THE BOX! #LesPaul #Gibson #Electric #Custom #Ebony #92953 #StevesMusic Specs ... Top Material:2-piece plain Maple Body:Mahogany Finish: Nitrocellulose Gloss Lacquer Neck Material: Mahogany Fingerboard Material:Ebony Fingerboard Radius: 12" Inlay: Mother-of-Pearl Blocks Frets: 22, Medium Jumbo Scale Length:24.75" Nut Width: 1.69" Nut Material: Corian Bridge/Tailpiece: Tune-o-Matic with Stopbar Tuners: Grover Kidney Neck Pickup: 490R Humbucker Bridge Pickup: 498T Humbucker Controls: 2 x volume, 2 x tone, 3-way toggle pickup switch Case:Gibson Hardshell

Trace Elliot TA100 100 watt amplifier! ON SALE $599! #TraceElliot #Amp #Guitar #OnSale #419133 #StevesMusic Specs 2 preamp channels with 100 Watts stereo total power output.... 2 x 5" (127mm) specially designed neodymium Celestion speakers connected in stereo. 1/4" (6.35mm) jack input with Piezo switch, to switch to ultra-high impedance input stage on Channel 1. Combination balanced XLR / 1/4" (6.35mm) jack input with phantom power switch on Channel 2. Lo-Trim & Hi-Trim rotary controls on Channel 1. Gain & Notch filter rotary controls on both Channels. Built in auto-compressor on both channels. Signal level LED on both channels. Shape switch for instant EQ'd sound on both channels (footswitchable on Channel 1). Phase switch to help with control of feedback (footswitchable) on both channels. Effect Parameter and Setting rotary encoders. Allows for separate levels of Reverb to be applied to each channel. Channel 1 can also have either Chorus, Flange, Phaser, Tremolo, and various delays including stereo Ping Pong. Tap tempo (from either front panel or footswitch). 6-band graphic EQ. Durable GatorHyde finish Feedback Locating System on each band of EQ that uses LEDs to show where feedback is occurring. Master volume and Mute switch (footswitchable), mutes all outputs except Tuner Out. Tuner output, Left and Right Preamp Outputs and Power amp Inputs (to use as effects loop). Two DI outputs can be configured as dry Channel 1 and Channel 2 out, or processed Left and Right channels out. Switch for turning front panel lights on or off. Power section featuring Dynamic Correction. Protective Trace Elliot embroidered carrying bag included. Full function footswitch and stage length cable included. Weight Unpacked: 13.23 lbs. (6 kg) Weight Packed: 13.23 lbs. (6 kg) Width Packed: 10.2" (25.908 cm) Depth Packed: 17" (43.18 cm) Height Packed: 10.2" (25.908 cm) See more

Trace Elliot TA-200 Acoustic Guitar Combo 200 watt amp! ON SALE $599! #traceelliot #Amp #Power #41914 #StevesMusic Features 2 preamp channels Lo-Trim & Hi-Trim rotary controls on Channel 1... Gain & Notch filter rotary controls Built in auto-compressor Signal level LED Shape switch for instant EQ'd sound Phase switch Effect Parameter and Setting rotary encoders Tap tempo from either front panel or footswitch 6-band graphic EQ Feedback Locating System on each band of EQ Master Volume and Mute switch Switch for turning front panel lights on or off Durable GatorHyde finish Protective Trace Elliot embroidered carrying bag included Full function footswitch and stage length cable included 4 x 5" specially designed neodymium Celestion speakers 1/4" jack input with Piezo switch Combination balanced XLR / 1/4" jack input with phantom power switch 200W See more

Line 6 DT50 Amp head! $824.50 CDN #Amp #Line6 #58797 #StevesMusic Features Advanced HD modeling technology... Reinhold Bogner's most flexible tube design 2 - 12AX7 preamp tubes 2 EL34 power amp tubes Selectable 25W/50W outputs Simple and straightforward 2-channel design Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume Master volume High and Low inputs Reconfigurable analog components (Class A/Class AB, Pentode/Triode) Complete, one-touch analog reconfiguration (via Channel select switch) Low-power mode MIDI in and out L6 LINK in/thru connection for POD HD integration Footswitch jack for channel switching Serial effect loop with level control XLR direct out with cabinet simulation and ground lift switch 4, 8 and 16-ohm speaker outs Specs Amp Type: Adaptive Modeling: Line 6 HD Modeling Tube Section: 2x12AX7 Preamp; 2xEL34 Power Amp Designed by Reinhold Bogner Voicings: Selectable, (Cathode or Fixed Bias) Bias Types: Type I (Tight Feedback, California Clean) Type II (Looser Feedback, Crunchy British Feel) Type III (Zero Negative Feedback, Chimey Brit Feel) Type IV (Modern Feedback, Higher Gain) Operating Class and Wattage: Selectable: Class A (25W) <> Class AB (50W) Power Tube Config: Selectable: Pentode <> Triode Foot Controller: POD HD300/400/500 via L6 LINK; Standard 1/4" Tip-Sleeve Footswitch for Channel Switching Other I/O: Serial FX Loop, MIDI IN/OUT, Cabinet Simulated Direct Outh62006

These Yamaha Drums Tour Custom kits are incredible. 10/12/16/22/snare + all maple shells! You would not believe the price on these. DM us, more colors in stock as well! #Yamaha #Drums #TourCustom #12844 #12849 #StevesMusic